Pioneer DDJ-SX
Beta. This mapping works on paper and has a picture in the Controller Editor, but nobody has tried it in openDJ on the real controller yet. If you have one, tell us how it goes: what works, and what doesn't.
Getting started
Plug the DDJ-SX in with its USB cable and it picks this mapping by itself. It's also a sound card: choose it in Settings › Audio, with the main output on channels 1-2 and the headphones on 3-4. This is Mixxx's mapping; the DDJ-SX2 and DDJ-RX have their own entries that use it too.
- DECK 1-4 switch each side between its two decks; the four mixer channels are, left to right, 3, 1, 2 and 4.
- Pad modes: HOT CUE, ROLL, SLICER and SAMPLER. Hold SAMPLER to switch the sampler pads to velocity. PARAMETER ◀ ▶ change the beat jump size, the roll lengths or the slicer range.
- FX1 and FX2 run effect units 1 and 2; the FX ASSIGN buttons on each channel send it to them (SHIFT: units 3 and 4).
- VINYL turns scratching on the jog wheel on and off. KEYLOCK turns key lock on; hold it to reset the tempo.
- The MASTER and HEADPHONES level knobs work on the controller's own sound card, not on openDJ's knobs.
When you try it
- Play and scratch on all four decks.
- Try every pad mode, with and without SHIFT.
- Check that the lights follow what's on screen on decks 1-4.
Every control
Mapping by Maximilian Beiersdorfer, DJMaxergy, from Mixxx · Mixxx manual page · Forum thread
Pioneer DDJ-SX controller mapping
Mixer
| Action | With SHIFT |
|---|---|
| Crossfader Curve adjust (), Knob: Frontpanel CROSSFADER CURVE | – |
| Show/hide EffectRack/Sampler, Button: left PANEL SELECT | – |
| Enable/show EffectUnit 3 and 4 assignment on FX ASSIGN buttons, Button: left SHIFT + PANEL SELECT | – |
| Toggle maximized view of Library, Button: SHIFT & BACK | – |
| Split headphone cueing (right = master mono and left = pfl mono), Button: SHIFT & MASTER CUE | – |
Samplers
| Action | With SHIFT |
|---|---|
| Sampler Volume fader (), Slider: SAMPLER VOLUME | – |
| Preview of selected song, stop preview if no rotation between next press (Down: Load and start -- Up: Jump to position of User-Options), Button: LOAD PREPARE | – |
Browser
| Action | With SHIFT |
|---|---|
| Move vertical in Library (old: Select track in Playlist), Knob: BROWSER | – |
| Move horizontal in Library (old: Select Playlist), Knob: SHIFT & BROWSER | – |
| Move focus forward in Library (old: Add selected track to AutoDJ Playlist), Button: BROWSER PRESS | – |
| Choose item (double click on selected item) (old: Expand/collapse selected sidebar item), Button: SHIFT & BROWSER PRESS | – |
| Move focus backward in Library (old: Skip next track in AutoDJ playlist), Button: BACK | – |
| Toggle AutoDJ On/Off, Button: SHIFT & LOAD | – |
| Auto DJ Sync Key, Button: SHIFT & LOAD2 | – |
| Auto DJ Sync BPM, Button: SHIFT & LOAD1 | – |
Decks
| Action | With SHIFT |
|---|---|
| Channel fader Deck 1 (), Slider: CHANNELFADER Deck 1 | – |
| Filter Deck 1 (), Knob: FILTER Deck 1 | – |
| Low level Deck 1 (), Knob: LOW Deck 1 | – |
| Mid level Deck 1 (), Knob: MID Deck 1 | – |
| High level Deck 1 (), Knob: HI Deck 1 | – |
| Gain Deck 1 (), Knob: TRIM Deck 1 | – |
| Load selected Deck 1, Button: LOAD Deck 1 | – |
| Toggles headphone cueing Deck 1, Button: CUE Deck 1 | – |
| Toggles BPM Tap Deck 1, Button: SHIFT & CUE Deck 1 | – |
| Assigns Deck 1 to Crossfader, Switch left: CROSSFADER ASSIGN Deck 1 | – |
| Disconnects Deck 1 from Crossfader, Switch center: CROSSFADER ASSIGN Deck 1 | – |
| Assigns Deck 1 to Crossfader, Switch right: CROSSFADER ASSIGN Deck 1 | – |
| Effect Unit 1 assignment Deck 1, Button: FX1 assign Deck 1 | – |
| Effect Unit 2 assignment Deck 1, Button: FX2 assign Deck 1 | – |
| Effect Unit 3 assignment Deck 1, Button: FX1 assign Deck 1 | – |
| Effect Unit 4 assignment Deck 1, Button: FX2 assign Deck 1 | – |
| Toggles Play/Pause Deck 1, Button: left PLAY (Deck 1 active) | – |
| Stutter Deck 1, Button: SHIFT & left PLAY (Deck 1 active) | – |
| Cue Deck 1, Button: left CUE (Deck 1 active) | – |
| Jump to beginning of the track and stop Deck 1, Button: left SHIFT CUE (Deck 1 active) | – |
| Tempo slider Deck 1 (), Slider: left TEMPO (Deck 1 active) | – |
| Vinyl Deck 1, Button: left VINYL (Deck 1 active) | – |
| Touch detection for Needle Search Deck 1, Touch: left NEEDLE SEARCH (Deck 1 active) | – |
| Jump to track position (Needle Search) Deck 1, Touch: left NEEDLE SEARCH (Deck 1 active) | – |
| Touch detection for Needle Search Deck 1, Touch: left SHIFT NEEDLE SEARCH (Deck 1 active) | – |
| Jump to track position (Needle Search) Deck 1, Touch: left SHIFT NEEDLE SEARCH (Deck 1 active) | – |
| Shift Deck 1, Button: left SHIFT (Deck 1 active) | – |
| Jog touch (No Vinyl Mode) Deck 1, left JOGDIAL (Deck 1 active) | – |
| Jog touch (Vinyl Mode) Deck 1, left JOGDIAL (Deck 1 active) | – |
| Jog shift touch Deck 1, SHIFT left JOGDIAL (Deck 1 active) | – |
| Jog (no Vinyl Mode) Deck 1, left JOGDIAL (Deck 1 active) | – |
| Jog (Vinyl Mode) Deck 1, left JOGDIAL (Deck 1 active) | – |
| Jog fast Deck 1, SHIFT left JOGDIAL (Deck 1 active) | – |
| Jog ring Deck 1, left JOGDIALSIDE (Deck 1 active) | – |
| Jog ring shift Deck 1, SHIFT left JOGDIALSIDE (Deck 1 active) | – |
| Key lock Deck 1, Button: left KEYLOCK (Deck 1 active) | – |
| Tempo Range Deck 1, Button: left SHIFT & KEYLOCK (Deck 1 active) | – |
| Tempo(Rate) Reset Deck 1, Button: longpress left KEYLOCK (Deck 1 active) | – |
| Set and enable/exit beatloop with length of beatloop_size Deck 1, Button: left AUTOLOOP (Deck 1 active) | – |
| Activate/Deactivate conf. loop Deck 1, Button: left AUTOLOOP (Deck 1 active) | – |
| Manual loop half Deck 1, Button: HALVE LOOP (Deck 1 active) | – |
| Manual loop double Deck 1, Button: DOUBLE LOOP (Deck 1 active) | – |
| Manual loop move forward Deck 1, Button: SHIFT & DOUBLE LOOP (Deck 1 active) | – |
| Manual loop move back Deck 1, Button: SHIFT & HALVE LOOP (Deck 1 active) | – |
| Manual loop in Deck 1, Button: LOOP IN (Deck 1 active) | – |
| Jump to current loop in point and stop playback Deck 1, Button: SHIFT + LOOP IN (Deck 1 active) | – |
| Manual loop out Deck 1, Button: LOOP OUT (Deck 1 active) | – |
| Manual loop exit Deck 1, Button: SHIFT & LOOP OUT (Deck 1 active) | – |
| Adjust Beat-Grid with jogwheel Deck 1 (hold button), Button: left GRID ADJUST (Deck 1 active) | – |
| Set Beat-Grid to current track position Deck 1, Button: left SHIFT + GRID ADJUST (Deck 1 active) | – |
| Move Beat-Grid 1 beat forward/backward with jogwheel Deck 1 (hold button), Button: left GRID SLIDE (Deck 1 active) | – |
| Quantize Deck 1, Button: left SHIFT SYNC (Deck 1 active) | – |
| Sync Deck 1, Button: left SYNC (Deck 1 active) | – |
| Slip Deck 1, Button: left SLIP (Deck 1 active) | – |
| ReverseRoll Deck 1, Button: left CENSOR (Deck 1 active) | – |
| Play track backwards (reverse play) Deck 1, Button: SHIFT & left CENSOR (Deck 1 active) | – |
| Beatjump amount of beatjump_size forwards, Button: PARAMETER1 RIGHT (in HOTCUE-Mode, Deck 1 active) | – |
| Beatjump amount of beatjump_size backwards, Button: PARAMETER1 LEFT (in HOTCUE-Mode, Deck 1 active) | – |
| Double beatjump_size, Button: PARAMETER2 RIGHT (in HOTCUE-Mode, Deck 1 active) | – |
| Halve beatjump_size, Button: PARAMETER2 LEFT (in HOTCUE-Mode, Deck 1 active) | – |
| Change Pad-Parameter Set (increment), Button: PARAMETER1 RIGHT (in ROLL-Mode, Deck 1 active) | – |
| Change Pad-Parameter Set (decrement), Button: PARAMETER1 LEFT (in ROLL-Mode, Deck 1 active) | – |
| Change Slicer quantization (increment), Button: PARAMETER1 RIGHT (in SLICER-Mode, Deck 1 active) | – |
| Change Slicer quantization (decrement), Button: PARAMETER1 LEFT (in SLICER-Mode, Deck 1 active) | – |
| Change Slicer domain (increment), Button: PARAMETER2 RIGHT (in SLICER-Mode, Deck 1 active) | – |
| Change Slicer domain (decrement), Button: PARAMETER2 LEFT (in SLICER-Mode, Deck 1 active) | – |
| Change Sampler bank (increment), Button: PARAMETER1 RIGHT (in SAMPLER-Mode, Deck 1 active) | – |
| Change Sampler bank (decrement), Button: PARAMETER1 LEFT (in SAMPLER-Mode, Deck 1 active) | – |
| Change Pad-Parameter Set (increment), Button: PARAMETER1 RIGHT (in GROUP2-Mode, Deck 1 active) | – |
| Change Pad-Parameter Set (decrement), Button: PARAMETER1 LEFT (in GROUP2-Mode, Deck 1 active) | – |
| Hot-Cue 1 Deck 1, Button: PAD1 (in HOT-CUE-Mode, Deck 1 active) | – |
| Hot-Cue 2 Deck 1, Button: PAD2 (in HOT-CUE-Mode, Deck 1 active) | – |
| Hot-Cue 3 Deck 1, Button: PAD3 (in HOT-CUE-Mode, Deck 1 active) | – |
| Hot-Cue 4 Deck 1, Button: PAD4 (in HOT-CUE-Mode, Deck 1 active) | – |
| Hot-Cue 5 Deck 1, Button: PAD5 (in HOT-CUE-Mode, Deck 1 active) | – |
| Hot-Cue 6 Deck 1, Button: PAD6 (in HOT-CUE-Mode, Deck 1 active) | – |
| Hot-Cue 7 Deck 1, Button: PAD7 (in HOT-CUE-Mode, Deck 1 active) | – |
| Hot-Cue 8 Deck 1, Button: PAD8 (in HOT-CUE-Mode, Deck 1 active) | – |
| Clear Hot-Cue 1 Deck 1, Button: SHIFT & PAD1 (in HOT-CUE-Mode, Deck 1 active) | – |
| Clear Hot-Cue 2 Deck 1, Button: SHIFT & PAD2 (in HOT-CUE-Mode, Deck 1 active) | – |
| Clear Hot-Cue 3 Deck 1, Button: SHIFT & PAD3 (in HOT-CUE-Mode, Deck 1 active) | – |
| Clear Hot-Cue 4 Deck 1, Button: SHIFT & PAD4 (in HOT-CUE-Mode, Deck 1 active) | – |
| Clear Hot-Cue 5 Deck 1, Button: SHIFT & PAD5 (in HOT-CUE-Mode, Deck 1 active) | – |
| Clear Hot-Cue 6 Deck 1, Button: SHIFT & PAD6 (in HOT-CUE-Mode, Deck 1 active) | – |
| Clear Hot-Cue 7 Deck 1, Button: SHIFT & PAD7 (in HOT-CUE-Mode, Deck 1 active) | – |
| Clear Hot-Cue 8 Deck 1, Button: SHIFT & PAD8 (in HOT-CUE-Mode, Deck 1 active) | – |
| Auto-Roll Deck 1, Button: PAD1 (in ROLL-Mode, Deck 1 active) | – |
| Auto-Roll Deck 1, Button: PAD2 (in ROLL-Mode, Deck 1 active) | – |
| Auto-Roll Deck 1, Button: PAD3 (in ROLL-Mode, Deck 1 active) | – |
| Auto-Roll Deck 1, Button: PAD4 (in ROLL-Mode, Deck 1 active) | – |
| Auto-Roll Deck 1, Button: PAD5 (in ROLL-Mode, Deck 1 active) | – |
| Auto-Roll Deck 1, Button: PAD6 (in ROLL-Mode, Deck 1 active) | – |
| Auto-Roll Deck 1, Button: PAD7 (in ROLL-Mode, Deck 1 active) | – |
| Auto-Roll Deck 1, Button: PAD8 (in ROLL-Mode, Deck 1 active) | – |
| Slicer beatjump/loop Beat 1 Deck 1, Button: PAD1 (in SLICER-Mode, Deck 1 active) | – |
| Slicer beatjump/loop Beat 2 Deck 1, Button: PAD2 (in SLICER-Mode, Deck 1 active) | – |
| Slicer beatjump/loop Beat 3 Deck 1, Button: PAD3 (in SLICER-Mode, Deck 1 active) | – |
| Slicer beatjump/loop Beat 4 Deck 1, Button: PAD4 (in SLICER-Mode, Deck 1 active) | – |
| Slicer beatjump/loop Beat 5 Deck 1, Button: PAD5 (in SLICER-Mode, Deck 1 active) | – |
| Slicer beatjump/loop Beat 6 Deck 1, Button: PAD6 (in SLICER-Mode, Deck 1 active) | – |
| Slicer beatjump/loop Beat 7 Deck 1, Button: PAD7 (in SLICER-Mode, Deck 1 active) | – |
| Slicer beatjump/loop Beat 8 Deck 1, Button: PAD8 (in SLICER-Mode, Deck 1 active) | – |
| Sampler 1 play, Button: PAD1 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 1 play with velocity volume, Button: PAD1 (in SAMPLER-Mode, VELOCITY active, Deck 1 active) | – |
| Sampler 1 stop, Button: SHIFT & PAD1 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 2 play, Button: PAD2 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 2 play with velocity volume, Button: PAD2 (in SAMPLER-Mode, VELOCITY active, Deck 1 active) | – |
| Sampler 2 stop, Button: SHIFT & PAD2 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 3 play, Button: PAD3 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 3 play with velocity volume, Button: PAD3 (in SAMPLER-Mode, VELOCITY active, Deck 1 active) | – |
| Sampler 3 stop, Button: SHIFT & PAD3 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 4 play, Button: PAD4 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 4 play with velocity volume, Button: PAD4 (in SAMPLER-Mode, VELOCITY active, Deck 1 active) | – |
| Sampler 4 stop, Button: SHIFT & PAD4 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 5 play, Button: PAD5 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 5 play with velocity volume, Button: PAD5 (in SAMPLER-Mode, VELOCITY active, Deck 1 active) | – |
| Sampler 5 stop, Button: SHIFT & PAD5 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 6 play, Button: PAD6 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 6 play with velocity volume, Button: PAD6 (in SAMPLER-Mode, VELOCITY active, Deck 1 active) | – |
| Sampler 6 stop, Button: SHIFT & PAD6 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 7 play, Button: PAD7 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 7 play with velocity volume, Button: PAD7 (in SAMPLER-Mode, VELOCITY active, Deck 1 active) | – |
| Sampler 7 stop, Button: SHIFT & PAD7 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 8 play, Button: PAD8 (in SAMPLER-Mode, Deck 1 active) | – |
| Sampler 8 play with velocity volume, Button: PAD8 (in SAMPLER-Mode, VELOCITY active, Deck 1 active) | – |
| Sampler 8 stop, Button: SHIFT & PAD8 (in SAMPLER-Mode, Deck 1 active) | – |
| Beatloop Deck 1, Button: PAD1 (in GROUP2-Mode, Deck 1 active) | – |
| Beatloop Deck 1, Button: PAD2 (in GROUP2-Mode, Deck 1 active) | – |
| Beatloop Deck 1, Button: PAD3 (in GROUP2-Mode, Deck 1 active) | – |
| Beatloop Deck 1, Button: PAD4 (in GROUP2-Mode, Deck 1 active) | – |
| Beatloop Deck 1, Button: PAD5 (in GROUP2-Mode, Deck 1 active) | – |
| Beatloop Deck 1, Button: PAD6 (in GROUP2-Mode, Deck 1 active) | – |
| Beatloop Deck 1, Button: PAD7 (in GROUP2-Mode, Deck 1 active) | – |
| Beatloop Deck 1, Button: PAD8 (in GROUP2-Mode, Deck 1 active) | – |
| Set PAD-Mode, Button: HOT CUE LEFT (Deck 1 active) | – |
| Set PAD-Mode, Button: ROLL LEFT (Deck 1 active) | – |
| Set PAD-Mode, Button: SLICER LEFT (Deck 1 active) | – |
| Set PAD-Mode, Button: SAMPLER LEFT (Deck 1 active) | – |
| Toggle Sampler-Pads behaviour: normal (max. volume) / velocity (volume = velocity), Button: SAMPLER Longpress (in SAMPLER-Mode, Deck 1 active) | – |
| Set PAD-Mode, Button: SHIFT ROLL LEFT (Deck 1 active) | – |
| Channel fader Deck 2 (), Slider: CHANNELFADER Deck 2 | – |
| Filter Deck 2 (), Knob: FILTER Deck 2 | – |
| Low level Deck 2 (), Knob: LOW Deck 2 | – |
| Mid level Deck 2 (), Knob: HI Deck 2 | – |
| High level Deck 2 (), Knob: HI Deck 2 | – |
| Gain Deck 2 (), Knob: TRIM Deck 2 | – |
| Load selected Deck 2, Button: LOAD Deck 2 | – |
| Toggles headphone cueing Deck 2, Button: CUE Deck 2 | – |
| Toggles BPM Tap Deck 2, Button: SHIFT & CUE Deck 2 | – |
| Assigns Deck 2 to Crossfader, Switch left: CROSSFADER ASSIGN Deck 2 | – |
| Disconnects Deck 2 from Crossfader, Switch center: CROSSFADER ASSIGN Deck 2 | – |
| Assigns Deck 2 to Crossfader, Switch right: CROSSFADER ASSIGN Deck 2 | – |
| Effect Unit 1 assignment Deck 2, Button: FX1 assign Deck 2 | – |
| Effect Unit 2 assignment Deck 2, Button: FX2 assign Deck 2 | – |
| Effect Unit 3 assignment Deck 2, Button: FX1 assign Deck 2 | – |
| Effect Unit 4 assignment Deck 2, Button: FX2 assign Deck 2 | – |
| Toggles Play/Pause Deck 2, Button: right PLAY (Deck 2 active) | – |
| Stutter Deck 2, Button: SHIFT & right PLAY (Deck 2 active) | – |
| Cue Deck 2, Button: right CUE (Deck 2 active) | – |
| Jump to beginning of the track and stop Deck 2, Button: right SHIFT CUE (Deck 2 active) | – |
| Tempo slider Deck 2 (), Slider: right TEMPO (Deck 2 active) | – |
| Vinyl Deck 2, Button: right VINYL (Deck 2 active) | – |
| Jump to track position (Needle Search) Deck 2, Touch: right NEEDLE SEARCH (Deck 2 active) | – |
| Touch detection for Needle Search Deck 2, Touch: right SHIFT NEEDLE SEARCH (Deck 2 active) | – |
| Jump to track position (Needle Search) Deck 2, Touch: right SHIFT NEEDLE SEARCH (Deck 2 active) | – |
| Shift Deck 2, Button: right SHIFT (Deck 2 active) | – |
| Jog touch (No Vinyl Mode) Deck 2, right JOGDIAL (Deck 2 active) | – |
| Jog touch (Vinyl Mode) Deck 2, right JOGDIAL (Deck 2 active) | – |
| Jog shift touch Deck 2, SHIFT right JOGDIAL (Deck 2 active) | – |
| Jog (no Vinyl Mode) Deck 2, right JOGDIAL (Deck 2 active) | – |
| Jog (Vinyl Mode) Deck 2, right JOGDIAL (Deck 2 active) | – |
| Jog fast Deck 2, SHIFT right JOGDIAL (Deck 2 active) | – |
| Jog ring Deck 2, right JOGDIALSIDE (Deck 2 active) | – |
| Jog ring shift Deck 2, SHIFT right JOGDIALSIDE (Deck 2 active) | – |
| Key lock Deck 2, Button: right KEYLOCK (Deck 2 active) | – |
| Tempo Range Deck 2, Button: right SHIFT & KEYLOCK (Deck 2 active) | – |
| Tempo(Rate) Reset Deck 2, Button: longpress right KEYLOCK (Deck 2 active) | – |
| Set and enable/exit beatloop with length of beatloop_size Deck 2, Button: right AUTOLOOP (Deck 2 active) | – |
| Activate/Deactivate conf. loop Deck 2, Button: right AUTOLOOP (Deck 2 active) | – |
| Manual loop half Deck 2, Button: HALVE LOOP (Deck 2 active) | – |
| Manual loop double Deck 2, Button: DOUBLE LOOP (Deck 2 active) | – |
| Manual loop move forward Deck 2, Button: SHIFT & DOUBLE LOOP (Deck 2 active) | – |
| Manual loop move back Deck 2, Button: SHIFT & HALVE LOOP (Deck 2 active) | – |
| Manual loop in Deck 2, Button: LOOP IN (Deck 2 active) | – |
| Jump to current loop in point and stop playback Deck 2, Button: SHIFT + LOOP IN (Deck 2 active) | – |
| Manual loop out Deck 2, Button: LOOP OUT (Deck 2 active) | – |
| Manual loop exit Deck 2, Button: SHIFT & LOOP OUT (Deck 2 active) | – |
| Adjust Beat-Grid with jogwheel Deck 2 (hold button), Button: right GRID ADJUST (Deck 2 active) | – |
| Set Beat-Grid to current track position Deck 2, Button: right SHIFT + GRID ADJUST (Deck 2 active) | – |
| Move Beat-Grid 1 beat forward/backward with jogwheel Deck 2 (hold button), Button: right GRID SLIDE (Deck 2 active) | – |
| Quantize Deck 2, Button: right SHIFT SYNC (Deck 2 active) | – |
| Sync Deck 2, Button: right SYNC (Deck 2 active) | – |
| Slip Deck 2, Button: right SLIP (Deck 2 active) | – |
| ReverseRoll Deck 2, Button: right CENSOR (Deck 2 active) | – |
| Play track backwards (reverse play) Deck 2, Button: SHIFT & right CENSOR (Deck 2 active) | – |
| Beatjump amount of beatjump_size forwards, Button: PARAMETER1 RIGHT (in HOTCUE-Mode, Deck 2 active) | – |
| Beatjump amount of beatjump_size backwards, Button: PARAMETER1 LEFT (in HOTCUE-Mode, Deck 2 active) | – |
| Double beatjump_size, Button: PARAMETER2 RIGHT (in HOTCUE-Mode, Deck 2 active) | – |
| Halve beatjump_size, Button: PARAMETER2 LEFT (in HOTCUE-Mode, Deck 2 active) | – |
| Change Pad-Parameter Set (increment), Button: PARAMETER1 RIGHT (in ROLL-Mode, Deck 2 active) | – |
| Change Pad-Parameter Set (decrement), Button: PARAMETER1 LEFT (in ROLL-Mode, Deck 2 active) | – |
| Change Slicer quantization (increment), Button: PARAMETER1 RIGHT (in SLICER-Mode, Deck 2 active) | – |
| Change Slicer quantization (decrement), Button: PARAMETER1 LEFT (in SLICER-Mode, Deck 2 active) | – |
| Change Slicer domain (increment), Button: PARAMETER2 RIGHT (in SLICER-Mode, Deck 2 active) | – |
| Change Slicer domain (decrement), Button: PARAMETER2 LEFT (in SLICER-Mode, Deck 2 active) | – |
| Change Sampler bank (increment), Button: PARAMETER1 RIGHT (in SAMPLER-Mode, Deck 2 active) | – |
| Change Sampler bank (decrement), Button: PARAMETER1 LEFT (in SAMPLER-Mode, Deck 2 active) | – |
| Change Pad-Parameter Set (increment), Button: PARAMETER1 RIGHT (in GROUP2-Mode, Deck 2 active) | – |
| Change Pad-Parameter Set (decrement), Button: PARAMETER1 LEFT (in GROUP2-Mode, Deck 2 active) | – |
| Hot-Cue 1 Deck 2, Button: PAD1 (in HOT-CUE-Mode, Deck 2 active) | – |
| Hot-Cue 2 Deck 2, Button: PAD2 (in HOT-CUE-Mode, Deck 2 active) | – |
| Hot-Cue 3 Deck 2, Button: PAD3 (in HOT-CUE-Mode, Deck 2 active) | – |
| Hot-Cue 4 Deck 2, Button: PAD4 (in HOT-CUE-Mode, Deck 2 active) | – |
| Hot-Cue 5 Deck 2, Button: PAD5 (in HOT-CUE-Mode, Deck 2 active) | – |
| Hot-Cue 6 Deck 2, Button: PAD6 (in HOT-CUE-Mode, Deck 2 active) | – |
| Hot-Cue 7 Deck 2, Button: PAD7 (in HOT-CUE-Mode, Deck 2 active) | – |
| Hot-Cue 8 Deck 2, Button: PAD8 (in HOT-CUE-Mode, Deck 2 active) | – |
| Clear Hot-Cue 1 Deck 2, Button: SHIFT & PAD1 (in HOT-CUE-Mode, Deck 2 active) | – |
| Clear Hot-Cue 2 Deck 2, Button: SHIFT & PAD2 (in HOT-CUE-Mode, Deck 2 active) | – |
| Clear Hot-Cue 3 Deck 2, Button: SHIFT & PAD3 (in HOT-CUE-Mode, Deck 2 active) | – |
| Clear Hot-Cue 4 Deck 2, Button: SHIFT & PAD4 (in HOT-CUE-Mode, Deck 2 active) | – |
| Clear Hot-Cue 5 Deck 2, Button: SHIFT & PAD5 (in HOT-CUE-Mode, Deck 2 active) | – |
| Clear Hot-Cue 6 Deck 2, Button: SHIFT & PAD6 (in HOT-CUE-Mode, Deck 2 active) | – |
| Clear Hot-Cue 7 Deck 2, Button: SHIFT & PAD7 (in HOT-CUE-Mode, Deck 2 active) | – |
| Clear Hot-Cue 8 Deck 2, Button: SHIFT & PAD8 (in HOT-CUE-Mode, Deck 2 active) | – |
| Auto-Roll 1/16 Deck 2, Button: PAD1 (in ROLL-Mode, Deck 2 active) | – |
| Auto-Roll 1/8 Deck 2, Button: PAD2 (in ROLL-Mode, Deck 2 active) | – |
| Auto-Roll 1/4 Deck 2, Button: PAD3 (in ROLL-Mode, Deck 2 active) | – |
| Auto-Roll 1/2 Deck 2, Button: PAD4 (in ROLL-Mode, Deck 2 active) | – |
| Auto-Roll 1 Deck 2, Button: PAD5 (in ROLL-Mode, Deck 2 active) | – |
| Auto-Roll 2 Deck 2, Button: PAD6 (in ROLL-Mode, Deck 2 active) | – |
| Auto-Roll 4 Deck 2, Button: PAD7 (in ROLL-Mode, Deck 2 active) | – |
| Auto-Roll 8 Deck 2, Button: PAD8 (in ROLL-Mode, Deck 2 active) | – |
| Slicer beatjump/loop Beat 1 Deck 2, Button: PAD1 (in SLICER-Mode, Deck 2 active) | – |
| Slicer beatjump/loop Beat 2 Deck 2, Button: PAD2 (in SLICER-Mode, Deck 2 active) | – |
| Slicer beatjump/loop Beat 3 Deck 2, Button: PAD3 (in SLICER-Mode, Deck 2 active) | – |
| Slicer beatjump/loop Beat 4 Deck 2, Button: PAD4 (in SLICER-Mode, Deck 1 active) | – |
| Slicer beatjump/loop Beat 5 Deck 2, Button: PAD5 (in SLICER-Mode, Deck 2 active) | – |
| Slicer beatjump/loop Beat 6 Deck 2, Button: PAD6 (in SLICER-Mode, Deck 2 active) | – |
| Slicer beatjump/loop Beat 7 Deck 2, Button: PAD7 (in SLICER-Mode, Deck 2 active) | – |
| Slicer beatjump/loop Beat 8 Deck 2, Button: PAD8 (in SLICER-Mode, Deck 2 active) | – |
| Sampler 1 play, Button: PAD1 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 1 play with velocity volume, Button: PAD1 (in SAMPLER-Mode, VELOCITY active, Deck 2 active) | – |
| Sampler 1 stop, Button: SHIFT & PAD1 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 2 play, Button: PAD2 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 2 play with velocity volume, Button: PAD2 (in SAMPLER-Mode, VELOCITY active, Deck 2 active) | – |
| Sampler 2 stop, Button: SHIFT & PAD2 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 3 play, Button: PAD3 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 3 play with velocity volume, Button: PAD3 (in SAMPLER-Mode, VELOCITY active, Deck 2 active) | – |
| Sampler 3 stop, Button: SHIFT & PAD3 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 4 play, Button: PAD4 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 4 play with velocity volume, Button: PAD4 (in SAMPLER-Mode, VELOCITY active, Deck 2 active) | – |
| Sampler 4 stop, Button: SHIFT & PAD4 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 5 play, Button: PAD5 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 5 play with velocity volume, Button: PAD5 (in SAMPLER-Mode, VELOCITY active, Deck 2 active) | – |
| Sampler 5 stop, Button: SHIFT & PAD5 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 6 play, Button: PAD6 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 6 play with velocity volume, Button: PAD6 (in SAMPLER-Mode, VELOCITY active, Deck 2 active) | – |
| Sampler 6 stop, Button: SHIFT & PAD6 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 7 play, Button: PAD7 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 7 play with velocity volume, Button: PAD7 (in SAMPLER-Mode, VELOCITY active, Deck 2 active) | – |
| Sampler 7 stop, Button: SHIFT & PAD7 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 8 play, Button: PAD8 (in SAMPLER-Mode, Deck 2 active) | – |
| Sampler 8 play with velocity volume, Button: PAD8 (in SAMPLER-Mode, VELOCITY active, Deck 2 active) | – |
| Sampler 8 stop, Button: SHIFT & PAD8 (in SAMPLER-Mode, Deck 2 active) | – |
| Beatloop Deck 2, Button: PAD1 (in GROUP2-Mode, Deck 2 active) | – |
| Beatloop Deck 2, Button: PAD2 (in GROUP2-Mode, Deck 2 active) | – |
| Beatloop Deck 2, Button: PAD3 (in GROUP2-Mode, Deck 2 active) | – |
| Beatloop Deck 2, Button: PAD4 (in GROUP2-Mode, Deck 2 active) | – |
| Beatloop Deck 2, Button: PAD5 (in GROUP2-Mode, Deck 2 active) | – |
| Beatloop Deck 2, Button: PAD6 (in GROUP2-Mode, Deck 2 active) | – |
| Beatloop Deck 2, Button: PAD7 (in GROUP2-Mode, Deck 2 active) | – |
| Beatloop Deck 2, Button: PAD8 (in GROUP2-Mode, Deck 2 active) | – |
| Set PAD-Mode, Button: HOT CUE RIGHT (Deck 2 active) | – |
| Set PAD-Mode, Button: ROLL RIGHT (Deck 2 active) | – |
| Set PAD-Mode, Button: SLICER RIGHT (Deck 2 active) | – |
| Set PAD-Mode, Button: SAMPLER RIGHT (Deck 2 active) | – |
| Toggle Sampler-Pads behaviour: normal (max. volume) / velocity (volume = velocity), Button: SAMPLER Longpress (in SAMPLER-Mode, Deck 2 active) | – |
| Set PAD-Mode, Button: SHIFT ROLL RIGHT (Deck 2 active) | – |
| Channel fader Deck 3 (), Slider: CHANNELFADER Deck 3 | – |
| Filter Deck 3 (), Knob: FILTER Deck 3 | – |
| Low level Deck 3 (), Knob: LOW Deck 3 | – |
| Mid level Deck 3 (), Knob: MID Deck 3 | – |
| High level Deck 3 (), Knob: HI Deck 3 | – |
| Gain Deck 3 (), Knob: TRIM Deck 3 | – |
| Load selected Deck 3, Button: LOAD Deck 3 | – |
| Toggles headphone cueing Deck 3, Button: CUE Deck 3 | – |
| Toggles BPM Tap Deck 3, Button: SHIFT & CUE Deck 3 | – |
| Assigns Deck 3 to Crossfader, Switch left: CROSSFADER ASSIGN Deck 3 | – |
| Disconnects Deck 3 from Crossfader, Switch center: CROSSFADER ASSIGN Deck 3 | – |
| Assigns Deck 3 to Crossfader, Switch right: CROSSFADER ASSIGN Deck 3 | – |
| Effect Unit 1 assignment Deck 3, Button: FX1 assign Deck 3 | – |
| Effect Unit 2 assignment Deck 3, Button: FX2 assign Deck 3 | – |
| Effect Unit 3 assignment Deck 3, Button: FX1 assign Deck 3 | – |
| Effect Unit 4 assignment Deck 3, Button: FX2 assign Deck 3 | – |
| Toggles Play/Pause Deck 3, Button: left PLAY (Deck 3 active) | – |
| Stutter Deck 3, Button: SHIFT & left PLAY (Deck 3 active) | – |
| Cue Deck 3, Button: left CUE (Deck 3 active) | – |
| Jump to beginning of the track and stop Deck 3, Button: left SHIFT CUE (Deck 3 active) | – |
| Tempo slider Deck 3 (), Slider: left TEMPO (Deck 3 active) | – |
| Vinyl Deck 3, Button: left VINYL (Deck 3 active) | – |
| Jump to track position (Needle Search) Deck 3, Touch: left NEEDLE SEARCH (Deck 3 active) | – |
| Touch detection for Needle Search Deck 3, Touch: left SHIFT NEEDLE SEARCH (Deck 3 active) | – |
| Jump to track position (Needle Search) Deck 3, Touch: left SHIFT NEEDLE SEARCH (Deck 3 active) | – |
| Shift Deck 3, Button: left SHIFT (Deck 3 active) | – |
| Jog touch (No Vinyl Mode) Deck 3, left JOGDIAL (Deck 3 active) | – |
| Jog touch (Vinyl Mode) Deck 3, left JOGDIAL (Deck 3 active) | – |
| Jog shift touch Deck 3, SHIFT left JOGDIAL (Deck 3 active) | – |
| Jog (no Vinyl Mode) Deck 3, left JOGDIAL (Deck 3 active) | – |
| Jog (Vinyl Mode) Deck 3, left JOGDIAL (Deck 3 active) | – |
| Jog fast Deck 3, SHIFT left JOGDIAL (Deck 3 active) | – |
| Jog ring Deck 3, left JOGDIALSIDE (Deck 3 active) | – |
| Jog ring shift Deck 3, SHIFT left JOGDIALSIDE (Deck 3 active) | – |
| Key lock Deck 3, Button: left KEYLOCK (Deck 3 active) | – |
| Tempo Range Deck 3, Button: left SHIFT & KEYLOCK (Deck 3 active) | – |
| Tempo(Rate) Reset Deck 3, Button: longpress left KEYLOCK (Deck 3 active) | – |
| Set and enable/exit beatloop with length of beatloop_size Deck 3, Button: left AUTOLOOP (Deck 3 active) | – |
| Activate/Deactivate conf. loop Deck 3, Button: left AUTOLOOP (Deck 3 active) | – |
| Manual loop half Deck 3, Button: HALVE LOOP (Deck 3 active) | – |
| Manual loop double Deck 3, Button: DOUBLE LOOP (Deck 3 active) | – |
| Manual loop move forward Deck 3, Button: SHIFT & DOUBLE LOOP (Deck 3 active) | – |
| Manual loop move back Deck 3, Button: SHIFT & HALVE LOOP (Deck 3 active) | – |
| Manual loop in Deck 3, Button: LOOP IN (Deck 3 active) | – |
| Jump to current loop in point and stop playback Deck 3, Button: SHIFT + LOOP IN (Deck 3 active) | – |
| Manual loop out Deck 3, Button: LOOP OUT (Deck 3 active) | – |
| Manual loop exit Deck 3, Button: SHIFT & LOOP OUT (Deck 3 active) | – |
| Adjust Beat-Grid with jogwheel Deck 3 (hold button), Button: left GRID ADJUST (Deck 3 active) | – |
| Set Beat-Grid to current track position Deck 3, Button: left SHIFT + GRID ADJUST (Deck 3 active) | – |
| Move Beat-Grid 1 beat forward/backward with jogwheel Deck 3 (hold button), Button: left GRID SLIDE (Deck 3 active) | – |
| Quantize Deck 3, Button: left SHIFT SYNC (Deck 3 active) | – |
| Sync Deck 3, Button: left SYNC (Deck 3 active) | – |
| Slip Deck 3, Button: left SLIP (Deck 3 active) | – |
| ReverseRoll Deck 3, Button: left CENSOR (Deck 3 active) | – |
| Play track backwards (reverse play) Deck 3, Button: SHIFT & left CENSOR (Deck 3 active) | – |
| Beatjump amount of beatjump_size forwards, Button: PARAMETER1 RIGHT (in HOTCUE-Mode, Deck 3 active) | – |
| Beatjump amount of beatjump_size backwards, Button: PARAMETER1 LEFT (in HOTCUE-Mode, Deck 3 active) | – |
| Double beatjump_size, Button: PARAMETER2 RIGHT (in HOTCUE-Mode, Deck 3 active) | – |
| Halve beatjump_size, Button: PARAMETER2 LEFT (in HOTCUE-Mode, Deck 3 active) | – |
| Change Pad-Parameter Set (increment), Button: PARAMETER1 RIGHT (in ROLL-Mode, Deck 3 active) | – |
| Change Pad-Parameter Set (decrement), Button: PARAMETER1 LEFT (in ROLL-Mode, Deck 3 active) | – |
| Change Slicer quantization (increment), Button: PARAMETER1 RIGHT (in SLICER-Mode, Deck 3 active) | – |
| Change Slicer quantization (decrement), Button: PARAMETER1 LEFT (in SLICER-Mode, Deck 3 active) | – |
| Change Slicer domain (increment), Button: PARAMETER2 RIGHT (in SLICER-Mode, Deck 3 active) | – |
| Change Slicer domain (decrement), Button: PARAMETER2 LEFT (in SLICER-Mode, Deck 3 active) | – |
| Change Sampler bank (increment), Button: PARAMETER1 RIGHT (in SAMPLER-Mode, Deck 3 active) | – |
| Change Sampler bank (decrement), Button: PARAMETER1 LEFT (in SAMPLER-Mode, Deck 3 active) | – |
| Change Pad-Parameter Set (increment), Button: PARAMETER1 RIGHT (in GROUP2-Mode, Deck 3 active) | – |
| Change Pad-Parameter Set (decrement), Button: PARAMETER1 LEFT (in GROUP2-Mode, Deck 3 active) | – |
| Hot-Cue 1 Deck 3, Button: PAD1 (in HOT-CUE-Mode, Deck 3 active) | – |
| Hot-Cue 2 Deck 3, Button: PAD2 (in HOT-CUE-Mode, Deck 3 active) | – |
| Hot-Cue 3 Deck 3, Button: PAD3 (in HOT-CUE-Mode, Deck 3 active) | – |
| Hot-Cue 4 Deck 3, Button: PAD4 (in HOT-CUE-Mode, Deck 3 active) | – |
| Hot-Cue 5 Deck 3, Button: PAD5 (in HOT-CUE-Mode, Deck 3 active) | – |
| Hot-Cue 6 Deck 3, Button: PAD6 (in HOT-CUE-Mode, Deck 3 active) | – |
| Hot-Cue 7 Deck 3, Button: PAD7 (in HOT-CUE-Mode, Deck 3 active) | – |
| Hot-Cue 8 Deck 3, Button: PAD8 (in HOT-CUE-Mode, Deck 3 active) | – |
| Clear Hot-Cue 1 Deck 3, Button: SHIFT & PAD1 (in HOT-CUE-Mode, Deck 3 active) | – |
| Clear Hot-Cue 2 Deck 3, Button: SHIFT & PAD2 (in HOT-CUE-Mode, Deck 3 active) | – |
| Clear Hot-Cue 3 Deck 3, Button: SHIFT & PAD3 (in HOT-CUE-Mode, Deck 3 active) | – |
| Clear Hot-Cue 4 Deck 3, Button: SHIFT & PAD4 (in HOT-CUE-Mode, Deck 3 active) | – |
| Clear Hot-Cue 5 Deck 3, Button: SHIFT & PAD5 (in HOT-CUE-Mode, Deck 3 active) | – |
| Clear Hot-Cue 6 Deck 3, Button: SHIFT & PAD6 (in HOT-CUE-Mode, Deck 3 active) | – |
| Clear Hot-Cue 7 Deck 3, Button: SHIFT & PAD7 (in HOT-CUE-Mode, Deck 3 active) | – |
| Clear Hot-Cue 8 Deck 3, Button: SHIFT & PAD8 (in HOT-CUE-Mode, Deck 3 active) | – |
| Auto-Roll 1/16 Deck 3, Button: PAD1 (in ROLL-Mode, Deck 3 active) | – |
| Auto-Roll 1/8 Deck 3, Button: PAD2 (in ROLL-Mode, Deck 3 active) | – |
| Auto-Roll 1/4 Deck 3, Button: PAD3 (in ROLL-Mode, Deck 3 active) | – |
| Auto-Roll 1/2 Deck 3, Button: PAD4 (in ROLL-Mode, Deck 3 active) | – |
| Auto-Roll 1 Deck 3, Button: PAD5 (in ROLL-Mode, Deck 3 active) | – |
| Auto-Roll 2 Deck 3, Button: PAD6 (in ROLL-Mode, Deck 3 active) | – |
| Auto-Roll 4 Deck 3, Button: PAD7 (in ROLL-Mode, Deck 3 active) | – |
| Auto-Roll 8 Deck 3, Button: PAD8 (in ROLL-Mode, Deck 3 active) | – |
| Slicer beatjump/loop Beat 1 Deck 3, Button: PAD1 (in SLICER-Mode, Deck 3 active) | – |
| Slicer beatjump/loop Beat 2 Deck 3, Button: PAD2 (in SLICER-Mode, Deck 3 active) | – |
| Slicer beatjump/loop Beat 3 Deck 3, Button: PAD3 (in SLICER-Mode, Deck 3 active) | – |
| Slicer beatjump/loop Beat 4 Deck 3, Button: PAD4 (in SLICER-Mode, Deck 3 active) | – |
| Slicer beatjump/loop Beat 5 Deck 3, Button: PAD5 (in SLICER-Mode, Deck 3 active) | – |
| Slicer beatjump/loop Beat 6 Deck 3, Button: PAD6 (in SLICER-Mode, Deck 3 active) | – |
| Slicer beatjump/loop Beat 7 Deck 3, Button: PAD7 (in SLICER-Mode, Deck 3 active) | – |
| Slicer beatjump/loop Beat 8 Deck 3, Button: PAD8 (in SLICER-Mode, Deck 3 active) | – |
| Sampler 1 play, Button: PAD1 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 1 play with velocity volume, Button: PAD1 (in SAMPLER-Mode, VELOCITY active, Deck 3 active) | – |
| Sampler 1 stop, Button: SHIFT & PAD1 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 2 play, Button: PAD2 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 2 play with velocity volume, Button: PAD2 (in SAMPLER-Mode, VELOCITY active, Deck 3 active) | – |
| Sampler 2 stop, Button: SHIFT & PAD2 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 3 play, Button: PAD3 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 3 play with velocity volume, Button: PAD3 (in SAMPLER-Mode, VELOCITY active, Deck 3 active) | – |
| Sampler 3 stop, Button: SHIFT & PAD3 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 4 play, Button: PAD4 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 4 play with velocity volume, Button: PAD4 (in SAMPLER-Mode, VELOCITY active, Deck 3 active) | – |
| Sampler 4 stop, Button: SHIFT & PAD4 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 5 play, Button: PAD5 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 5 play with velocity volume, Button: PAD5 (in SAMPLER-Mode, VELOCITY active, Deck 3 active) | – |
| Sampler 5 stop, Button: SHIFT & PAD5 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 6 play, Button: PAD6 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 6 play with velocity volume, Button: PAD6 (in SAMPLER-Mode, VELOCITY active, Deck 3 active) | – |
| Sampler 6 stop, Button: SHIFT & PAD6 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 7 play, Button: PAD7 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 7 play with velocity volume, Button: PAD7 (in SAMPLER-Mode, VELOCITY active, Deck 3 active) | – |
| Sampler 7 stop, Button: SHIFT & PAD7 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 8 play, Button: PAD8 (in SAMPLER-Mode, Deck 3 active) | – |
| Sampler 8 play with velocity volume, Button: PAD8 (in SAMPLER-Mode, VELOCITY active, Deck 3 active) | – |
| Sampler 8 stop, Button: SHIFT & PAD8 (in SAMPLER-Mode, Deck 3 active) | – |
| Beatloop Deck 3, Button: PAD1 (in GROUP2-Mode, Deck 3 active) | – |
| Beatloop Deck 3, Button: PAD2 (in GROUP2-Mode, Deck 3 active) | – |
| Beatloop Deck 3, Button: PAD3 (in GROUP2-Mode, Deck 3 active) | – |
| Beatloop Deck 3, Button: PAD4 (in GROUP2-Mode, Deck 3 active) | – |
| Beatloop Deck 3, Button: PAD5 (in GROUP2-Mode, Deck 3 active) | – |
| Beatloop Deck 3, Button: PAD6 (in GROUP2-Mode, Deck 3 active) | – |
| Beatloop Deck 3, Button: PAD7 (in GROUP2-Mode, Deck 3 active) | – |
| Beatloop Deck 3, Button: PAD8 (in GROUP2-Mode, Deck 3 active) | – |
| Set PAD-Mode, Button: HOT CUE LEFT (Deck 3 active) | – |
| Set PAD-Mode, Button: ROLL LEFT (Deck 3 active) | – |
| Set PAD-Mode, Button: SLICER LEFT (Deck 3 active) | – |
| Set PAD-Mode, Button: SAMPLER LEFT (Deck 3 active) | – |
| Toggle Sampler-Pads behaviour: normal (max. volume) / velocity (volume = velocity), Button: SAMPLER Longpress (in SAMPLER-Mode, Deck 3 active) | – |
| Set PAD-Mode, Button: SHIFT ROLL LEFT (Deck 3 active) | – |
| Channel fader Deck 4 (), Slider: CHANNELFADER Deck 4 | – |
| Filter Deck 4 (), Knob: FILTER Deck 4 | – |
| Low level Deck 4 (), Knob: LOW Deck 4 | – |
| Mid level Deck 4 (), Knob: MID Deck 4 | – |
| High level Deck 4 (), Knob: HI Deck 4 | – |
| Gain Deck 4 (), Knob: TRIM Deck 4 | – |
| Load selected Deck 4, Button: LOAD Deck 4 | – |
| Toggles headphone cueing Deck 4, Button: right CUE (Deck 4 active) | – |
| Toggles BPM Tap Deck 4, Button: SHIFT & CUE Deck 4 | – |
| Assigns Deck 4 to Crossfader, Switch left: CROSSFADER ASSIGN Deck 4 | – |
| Disconnects Deck 4 from Crossfader, Switch center: CROSSFADER ASSIGN Deck 4 | – |
| Assigns Deck 4 to Crossfader, Switch right: CROSSFADER ASSIGN Deck 4 | – |
| Effect Unit 1 assignment Deck 4, Button: FX1 assign Deck 4 | – |
| Effect Unit 2 assignment Deck 4, Button: FX2 assign Deck 4 | – |
| Effect Unit 3 assignment Deck 4, Button: FX1 assign Deck 4 | – |
| Effect Unit 4 assignment Deck 4, Button: FX2 assign Deck 4 | – |
| Toggles Play/Pause Deck 4, Button: right PLAY (Deck 4 active) | – |
| Stutter Deck 4, Button: SHIFT & right PLAY (Deck 4 active) | – |
| Cue Deck 4, Button: right CUE (Deck 4 active) | – |
| Jump to beginning of the track and stop Deck 4, Button: right SHIFT CUE (Deck 4 active) | – |
| Tempo slider Deck 4 (), Slider: right TEMPO (Deck 4 active) | – |
| Vinyl Deck 4, Button: right VINYL (Deck 4 active) | – |
| Jump to track position (Needle Search) Deck 4, Touch: right NEEDLE SEARCH (Deck 4 active) | – |
| Touch detection for Needle Search Deck 4, Touch: right SHIFT NEEDLE SEARCH (Deck 4 active) | – |
| Jump to track position (Needle Search) Deck 4, Touch: right SHIFT NEEDLE SEARCH (Deck 4 active) | – |
| Shift Deck 4, Button: right SHIFT (Deck 4 active) | – |
| Jog touch (No Vinyl Mode) Deck 4, right JOGDIAL (Deck 4 active) | – |
| Jog touch (Vinyl Mode) Deck 4, right JOGDIAL (Deck 4 active) | – |
| Jog shift touch Deck 4, SHIFT right JOGDIAL (Deck 4 active) | – |
| Jog (no Vinyl Mode) Deck 4, right JOGDIAL (Deck 4 active) | – |
| Jog (Vinyl Mode) Deck 4, right JOGDIAL (Deck 4 active) | – |
| Jog fast Deck 4, SHIFT right JOGDIAL (Deck 4 active) | – |
| Jog ring Deck 4, right JOGDIALSIDE (Deck 4 active) | – |
| Jog ring shift Deck 4, SHIFT right JOGDIALSIDE (Deck 4 active) | – |
| Key lock Deck 4, Button: right KEYLOCK (Deck 4 active) | – |
| Tempo Range Deck 4, Button: right SHIFT & KEYLOCK (Deck 4 active) | – |
| Tempo(Rate) Reset Deck 4, Button: longpress right KEYLOCK (Deck 4 active) | – |
| Set and enable/exit beatloop with length of beatloop_size Deck 4, Button: right AUTOLOOP (Deck 4 active) | – |
| Activate/Deactivate conf. loop Deck 4, Button: right AUTOLOOP (Deck 4 active) | – |
| Manual loop half Deck 4, Button: HALVE LOOP (Deck 4 active) | – |
| Manual loop double Deck 4, Button: DOUBLE LOOP (Deck 4 active) | – |
| Manual loop move forward Deck 4, Button: SHIFT & DOUBLE LOOP (Deck 4 active) | – |
| Manual loop move back Deck 4, Button: SHIFT & HALVE LOOP (Deck 4 active) | – |
| Manual loop in Deck 4, Button: LOOP IN (Deck 4 active) | – |
| Jump to current loop in point and stop playback Deck 4, Button: SHIFT + LOOP IN (Deck 4 active) | – |
| Manual loop out Deck 4, Button: LOOP OUT (Deck 4 active) | – |
| Manual loop exit Deck 4, Button: SHIFT & LOOP OUT (Deck 4 active) | – |
| Adjust Beat-Grid with jogwheel Deck 4 (hold button), Button: right GRID ADJUST (Deck 4 active) | – |
| Set Beat-Grid to current track position Deck 4, Button: right SHIFT + GRID ADJUST (Deck 4 active) | – |
| Move Beat-Grid 1 beat forward/backward with jogwheel Deck 4 (hold button), Button: right GRID SLIDE (Deck 4 active) | – |
| Quantize Deck 4, Button: right SHIFT SYNC (Deck 4 active) | – |
| Sync Deck 4, Button: right SYNC (Deck 4 active) | – |
| Slip Deck 4, Button: right SLIP (Deck 4 active) | – |
| ReverseRoll Deck 4, Button: right CENSOR (Deck 4 active) | – |
| Play track backwards (reverse play) Deck 4, Button: SHIFT & right CENSOR (Deck 4 active) | – |
| Beatjump amount of beatjump_size forwards, Button: PARAMETER1 RIGHT (in HOTCUE-Mode, Deck 4 active) | – |
| Beatjump amount of beatjump_size backwards, Button: PARAMETER1 LEFT (in HOTCUE-Mode, Deck 4 active) | – |
| Double beatjump_size, Button: PARAMETER2 RIGHT (in HOTCUE-Mode, Deck 4 active) | – |
| Halve beatjump_size, Button: PARAMETER2 LEFT (in HOTCUE-Mode, Deck 4 active) | – |
| Change Pad-Parameter Set (increment), Button: PARAMETER1 RIGHT (in ROLL-Mode, Deck 4 active) | – |
| Change Pad-Parameter Set (decrement), Button: PARAMETER1 LEFT (in ROLL-Mode, Deck 4 active) | – |
| Change Slicer quantization (increment), Button: PARAMETER1 RIGHT (in SLICER-Mode, Deck 4 active) | – |
| Change Slicer quantization (decrement), Button: PARAMETER1 LEFT (in SLICER-Mode, Deck 4 active) | – |
| Change Slicer domain (increment), Button: PARAMETER2 RIGHT (in SLICER-Mode, Deck 4 active) | – |
| Change Slicer domain (decrement), Button: PARAMETER2 LEFT (in SLICER-Mode, Deck 4 active) | – |
| Change Sampler bank (increment), Button: PARAMETER1 RIGHT (in SAMPLER-Mode, Deck 4 active) | – |
| Change Sampler bank (decrement), Button: PARAMETER1 LEFT (in SAMPLER-Mode, Deck 4 active) | – |
| Change Pad-Parameter Set (increment), Button: PARAMETER1 RIGHT (in GROUP2-Mode, Deck 4 active) | – |
| Change Pad-Parameter Set (decrement), Button: PARAMETER1 LEFT (in GROUP2-Mode, Deck 4 active) | – |
| Hot-Cue 1 Deck 4, Button: PAD1 (in HOT-CUE-Mode, Deck 4 active) | – |
| Hot-Cue 2 Deck 4, Button: PAD2 (in HOT-CUE-Mode, Deck 4 active) | – |
| Hot-Cue 3 Deck 4, Button: PAD3 (in HOT-CUE-Mode, Deck 4 active) | – |
| Hot-Cue 4 Deck 4, Button: PAD4 (in HOT-CUE-Mode, Deck 4 active) | – |
| Hot-Cue 5 Deck 4, Button: PAD5 (in HOT-CUE-Mode, Deck 4 active) | – |
| Hot-Cue 6 Deck 4, Button: PAD6 (in HOT-CUE-Mode, Deck 4 active) | – |
| Hot-Cue 7 Deck 4, Button: PAD7 (in HOT-CUE-Mode, Deck 4 active) | – |
| Hot-Cue 8 Deck 4, Button: PAD8 (in HOT-CUE-Mode, Deck 4 active) | – |
| Clear Hot-Cue 1 Deck 4, Button: SHIFT & PAD1 (in HOT-CUE-Mode, Deck 4 active) | – |
| Clear Hot-Cue 2 Deck 4, Button: SHIFT & PAD2 (in HOT-CUE-Mode, Deck 4 active) | – |
| Clear Hot-Cue 3 Deck 4, Button: SHIFT & PAD3 (in HOT-CUE-Mode, Deck 4 active) | – |
| Clear Hot-Cue 4 Deck 4, Button: SHIFT & PAD4 (in HOT-CUE-Mode, Deck 4 active) | – |
| Clear Hot-Cue 5 Deck 4, Button: SHIFT & PAD5 (in HOT-CUE-Mode, Deck 4 active) | – |
| Clear Hot-Cue 6 Deck 4, Button: SHIFT & PAD6 (in HOT-CUE-Mode, Deck 4 active) | – |
| Clear Hot-Cue 7 Deck 4, Button: SHIFT & PAD7 (in HOT-CUE-Mode, Deck 4 active) | – |
| Clear Hot-Cue 8 Deck 4, Button: SHIFT & PAD8 (in HOT-CUE-Mode, Deck 4 active) | – |
| Auto-Roll 1/16 Deck 4, Button: PAD1 (in ROLL-Mode, Deck 4 active) | – |
| Auto-Roll 1/8 Deck 4, Button: PAD2 (in ROLL-Mode, Deck 4 active) | – |
| Auto-Roll 1/4 Deck 4, Button: PAD3 (in ROLL-Mode, Deck 4 active) | – |
| Auto-Roll 1/2 Deck 4, Button: PAD4 (in ROLL-Mode, Deck 4 active) | – |
| Auto-Roll 1 Deck 4, Button: PAD5 (in ROLL-Mode, Deck 4 active) | – |
| Auto-Roll 2 Deck 4, Button: PAD6 (in ROLL-Mode, Deck 4 active) | – |
| Auto-Roll 4 Deck 4, Button: PAD7 (in ROLL-Mode, Deck 4 active) | – |
| Auto-Roll 8 Deck 4, Button: PAD8 (in ROLL-Mode, Deck 4 active) | – |
| Slicer beatjump/loop Beat 1 Deck 4, Button: PAD1 (in SLICER-Mode, Deck 4 active) | – |
| Slicer beatjump/loop Beat 2 Deck 4, Button: PAD2 (in SLICER-Mode, Deck 4 active) | – |
| Slicer beatjump/loop Beat 3 Deck 4, Button: PAD3 (in SLICER-Mode, Deck 4 active) | – |
| Slicer beatjump/loop Beat 4 Deck 4, Button: PAD4 (in SLICER-Mode, Deck 4 active) | – |
| Slicer beatjump/loop Beat 5 Deck 4, Button: PAD5 (in SLICER-Mode, Deck 4 active) | – |
| Slicer beatjump/loop Beat 6 Deck 4, Button: PAD6 (in SLICER-Mode, Deck 4 active) | – |
| Slicer beatjump/loop Beat 7 Deck 4, Button: PAD7 (in SLICER-Mode, Deck 4 active) | – |
| Slicer beatjump/loop Beat 8 Deck 4, Button: PAD8 (in SLICER-Mode, Deck 4 active) | – |
| Sampler 1 play, Button: PAD1 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 1 play with velocity volume, Button: PAD1 (in SAMPLER-Mode, VELOCITY active, Deck 4 active) | – |
| Sampler 1 stop, Button: SHIFT & PAD1 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 2 play, Button: PAD2 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 2 play with velocity volume, Button: PAD2 (in SAMPLER-Mode, VELOCITY active, Deck 4 active) | – |
| Sampler 2 stop, Button: SHIFT & PAD2 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 3 play, Button: PAD3 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 3 play with velocity volume, Button: PAD3 (in SAMPLER-Mode, VELOCITY active, Deck 4 active) | – |
| Sampler 3 stop, Button: SHIFT & PAD3 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 4 play, Button: PAD4 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 4 play with velocity volume, Button: PAD4 (in SAMPLER-Mode, VELOCITY active, Deck 4 active) | – |
| Sampler 4 stop, Button: SHIFT & PAD4 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 5 play, Button: PAD5 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 5 play with velocity volume, Button: PAD5 (in SAMPLER-Mode, VELOCITY active, Deck 4 active) | – |
| Sampler 5 stop, Button: SHIFT & PAD5 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 6 play, Button: PAD6 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 6 play with velocity volume, Button: PAD6 (in SAMPLER-Mode, VELOCITY active, Deck 4 active) | – |
| Sampler 6 stop, Button: SHIFT & PAD6 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 7 play, Button: PAD7 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 7 play with velocity volume, Button: PAD7 (in SAMPLER-Mode, VELOCITY active, Deck 4 active) | – |
| Sampler 7 stop, Button: SHIFT & PAD7 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 8 play, Button: PAD8 (in SAMPLER-Mode, Deck 4 active) | – |
| Sampler 8 play with velocity volume, Button: PAD8 (in SAMPLER-Mode, VELOCITY active, Deck 4 active) | – |
| Sampler 8 stop, Button: SHIFT & PAD8 (in SAMPLER-Mode, Deck 4 active) | – |
| Beatloop Deck 4, Button: PAD1 (in GROUP2-Mode, Deck 4 active) | – |
| Beatloop Deck 4, Button: PAD2 (in GROUP2-Mode, Deck 4 active) | – |
| Beatloop Deck 4, Button: PAD3 (in GROUP2-Mode, Deck 4 active) | – |
| Beatloop Deck 4, Button: PAD4 (in GROUP2-Mode, Deck 4 active) | – |
| Beatloop Deck 4, Button: PAD5 (in GROUP2-Mode, Deck 4 active) | – |
| Beatloop Deck 4, Button: PAD6 (in GROUP2-Mode, Deck 4 active) | – |
| Beatloop Deck 4, Button: PAD7 (in GROUP2-Mode, Deck 4 active) | – |
| Beatloop Deck 4, Button: PAD8 (in GROUP2-Mode, Deck 4 active) | – |
| Set PAD-Mode, Button: HOT CUE RIGHT (Deck 4 active) | – |
| Set PAD-Mode, Button: ROLL RIGHT (Deck 4 active) | – |
| Set PAD-Mode, Button: SLICER RIGHT (Deck 4 active) | – |
| Set PAD-Mode, Button: SAMPLER RIGHT (Deck 4 active) | – |
| Toggle Sampler-Pads behaviour: normal (max. volume) / velocity (volume = velocity), Button: SAMPLER Longpress (in SAMPLER-Mode, Deck 4 active) | – |
| Set PAD-Mode, Button: SHIFT ROLL RIGHT (Deck 4 active) | – |
Effects
| Action | With SHIFT |
|---|---|
| Enable (if effectFocusButton pressed: Focus) Effect 1 of Effect Unit 1, Button: FX1-1 ON | – |
| Enable (if effectFocusButton pressed: Focus) Effect 2 of Effect Unit 1, Button: FX1-2 ON | – |
| Enable (if effectFocusButton pressed: Focus) Effect 3 of Effect Unit 1, Button: FX1-3 ON | – |
| Press hold: Enables effect focus selection, Shortpress: Toggles effect focus mode of EffectUnit 1, Button: FX1 TAP | – |
| Switch between EffectUnits, Button: SHIFT & FX1 TAP | – |
| Dry/Wet Mixing Ratio of Effect Unit 1, Knob: FX1 BEATS | – |
| Super1 Parameter of Effect Unit 1, Knob: SHIFT & FX1 BEATS | – |
| FX1 Effect 1 Meta (), Knob: FX1-1 | – |
| FX1 Effect 1 Select (), Knob: SHIFT + FX1-1 | – |
| FX1 Effect 2 Meta (), Knob: FX1-2 | – |
| FX1 Effect 2 Select (), Knob: SHIFT + FX1-2 | – |
| FX1 Effect 3 Meta (), Knob: FX1-3 | – |
| FX1 Effect 3 Select (), Knob: SHIFT + FX1-3 | – |
| Enable (if effectFocusButton pressed: Focus) Effect 1 of Effect Unit 2, Button: FX2-1 ON | – |
| Enable (if effectFocusButton pressed: Focus) Effect 2 of Effect Unit 2, Button: FX2-2 ON | – |
| Enable (if effectFocusButton pressed: Focus) Effect 3 of Effect Unit 2, Button: FX2-3 ON | – |
| Press hold: Enables effect focus selection, Shortpress: Toggles effect focus mode of EffectUnit 2, Button: FX2 TAP | – |
| Switch between EffectUnits, Button: SHIFT & FX2 TAP | – |
| Dry/Wet Mixing Ratio of Effect Unit 2, Knob: FX2 BEATS | – |
| Super1 Parameter of Effect Unit 2, Knob: SHIFT & FX2 BEATS | – |
| FX2 Effect 1 Meta (), Knob: FX2-1 | – |
| FX2 Effect 1 Select (), Knob: SHIFT + FX2-1 | – |
| FX2 Effect 2 Meta (), Knob: FX2-2 | – |
| FX2 Effect 2 Select (), Knob: SHIFT + FX2-2 | – |
| FX2 Effect 3 Meta (), Knob: FX2-3 | – |
| FX2 Effect 3 Select (), Knob: SHIFT + FX2-3 | – |
2 more controls in this mapping have no description, so they aren't listed.
Generated from res/controllers/Pioneer DDJ-SX.midi.xml. If something here is wrong on your controller, tell us.